RM RM Eye Instruction Manual download pdf (Page 67)

INDIVIDUAL OPERATIONS

PRINT-OUT OF MEASUREMENT VALUES

This instrument is equipped with a built-in printer to print out measurement values.

1 Confirm the measurement screen.

2 Press the of the control panel.

Measurement values of the monitor screen are printed out. After printing, the values are

erased automatically from the monitor screen.

NOTICE

• To avoid paper jam in the printer, do not feed the paper if it is partly

cut/torn or wrinkled.

• To avoid discoloring the printing paper (particularly the recording

area) during storage, use a polypropylene holder and not one con-

taining plasticizer (PVC, etc.).

• To avoid discoloring the printing paper (particularly the recording

area) after pasting, use water soluble glue and not one containing

solvent.

• Since the printer paper is heat sensitive, it is not suitable for

recording for a long period. If necessary to keep records for long,

we recommend to take copies separately.

The “ERR” mark is not printed. Also, printing is not done if there is no measure-

ment value. When a red line appears in the printer paper, replace it with new one.

For details about the replacement of printer paper, see “PRINTER PAPER SET-

TING” on page 53. Additionally, a 58mm wide paper roll (example: TF50KS-E2C

[Nippon Paper Co.]) is recommended.

When "CLOSE PRT COVER" is displayed, the printer cover is opened. Close it

correctly.

PRINT SWITCH

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 91 92

No comments

RM RM Eye Instruction Manual Page 67