RM One User Manual download pdf (Page 45)

The relevant standards are EN50082-1 and EN55022 and these

require:

_ Protection from spurious mains power interference

_ Immunity from external radio frequency interference

_ Safeguards against static discharges (ESD)

_ Reduced radio frequency emission from PCs

Environmental Factors

Recommended working ambient temperature range: 5 - 35°C.

Humidity conditions of between 20% and 80% (non-condensing).

Recommended maximum elevation above sea level for operation:

3,300 metres.

The notebook should not be subjected to vibration or shock. Always

transport your notebook in its original packing material.

USB Connector

The mainboard provides a Universal Host Controller Interface

Universal Serial Bus root for attaching USB devices like keyboard,

mouse, etc. You can plug the USB device directly to this connector.

Sign

1 VCC

2 -Data

3 GND

4 +Dat

System Setup (CMOS) Program

The BIOS has a built in setup program which allow the user to

modify the notebook's basic system parameters. This information is

stored in the battery backed CMOS memory.

Your notebook has been set up by RM and is ready to use.

Use the CMOS Setup program to change the system settings if:

_ you change the amount of memory in your notebook

_ you add or change a disk drive

_ you want to change the password

_ you want to set up special features.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52 53

No comments

RM One User Manual Page 45